Skip to main content

BREM-4..recovery vehicle.......sp designs

SP Designs BREM-4 Resin conversion set
This model started out as a Dragon BMP2 kit,i used the lower half of the hull and the running gear.
The Brem4 kit came with a new hull top and ancillarys.this was an easy straight forward conversion as the top deck fitted perfect .i made some parts from wire and styrene and added a few fittings from the kit.







I painted the model in Humbrol green and applied the brown and black camo freehand,this was then pin-washed ,dry-brushed and sprayed in matt cote.

Comments

Post a Comment

Popular posts from this blog

BAT-M engineers vehicle ..panzer shop

BAT-M Heavy Engineers vehicle This kit started off as one of the Panzershop full resin kits. There were a lot of missing parts/details missing from this kit and a lot of parts made incorrectly ,so there is about 45% of this kit which is scratch built. The paints are Humbrol and this was applied with an airbrush,i used 3 tins of green paint,one was darkened using a dark green, one was as tin,and the last tin was lightened with a light green. I applied the darkend green   over  around  the joints and  around the doors and panels,i then filled in with the normal green and highlighted with the lightened green The whole model was colour washed followed by dry brushing using the 2 lighter shades of green . This model was a gold medal winner at the IPMS UK  International  Scale model word 2010 -------------------------------------------------------------------------------------------------------------------------------------------------------------
Post a Comment
Read more

PPRU-1M (DOG EAR) Command and control vehicle...sp designs

 PPRU-1M SBORKA Mobile recon and command post,Nato code name DOG EAR. Based on MT-LBu tracked AFV it is equiped with a radar for the control of tactical air defence systems armed with missiles and artillary such as the Tunguska sa-19,ZSU-23 shilka, strella sa-13.the Sborka is capable of carrying out target designation whilst moving or stationary. The kit is a 1:35 scale resin kit from SP Designs .It did build up quite well, with a bit of coaxing. i needed to add to the kit and chop and change a few items as you do with most resin kits.The tracks are the resin ones supplied with the kit. i painted the model with humbrol enamels and added the camo freehand using an airbrush . i have pinwashed it and then drybrushed it..
Post a Comment
Read more

UR-77 meteorit mine clearing system

UR-77 METIORITE Mine clearing system UR-77 , the model is a conversion set from SP Designs for the Skif 2S1 SPH . It was a nice easy conversion consisting of a resin turret,rear support beams and a few small ancillarys. I used part of an Eduard etch kit and the rest is just plastic and brass wire. The tracks are metal ones from Fruil
Post a Comment
Read more