UR-77 meteorit mine clearing system

-












UR-77 METIORITE Mine clearing system
UR-77 , the model is a conversion set from SP Designs for the Skif 2S1 SPH .
It was a nice easy conversion consisting of a resin turret,rear support beams and a few small ancillarys.
I used part of an Eduard etch kit and the rest is just plastic and brass wire.
The tracks are metal ones from Fruil

Comments

Post a Comment

Popular posts from this blog

maz 543-m nba habitat unit

-
Image
This model was a conversion that i built up to use up one of the many old dragon scud kits i have in my stash I built up the very basic drive train in the kit minus the wheels,added basic scratch built axels  gearboxes and propshafts, I then built the left hand side drivers cab the bonet and radiator/grill and fitted it to the chassie, I  then scratch built a new radiator/grill and the right hand side of the bonnet and fenders.from evergreen strip and sheet. The accomodation unit and generator unit were scratch built from styrene sheet and evergreen strip and then scratch built the gun at the rear and made up and added all the fittings to the vehicle ready to paint. It was primed and painted using  ak acrilic paint and then pinwashed and dry brushed and finally finished with a matt cote I then cleaned up painted and fitted a set of meng weighted resin wheels.. Its a bit of a long vehicle but is something different untill trumpeter bring theres out to go with there ...
Read more

BAT-M engineers vehicle ..panzer shop

-
Image
BAT-M Heavy Engineers vehicle This kit started off as one of the Panzershop full resin kits. There were a lot of missing parts/details missing from this kit and a lot of parts made incorrectly ,so there is about 45% of this kit which is scratch built. The paints are Humbrol and this was applied with an airbrush,i used 3 tins of green paint,one was darkened using a dark green, one was as tin,and the last tin was lightened with a light green. I applied the darkend green   over  around  the joints and  around the doors and panels,i then filled in with the normal green and highlighted with the lightened green The whole model was colour washed followed by dry brushing using the 2 lighter shades of green . This model was a gold medal winner at the IPMS UK  International  Scale model word 2010 ----------------------------------------------------------------------------------------...
Read more

PPRU-1M (DOG EAR) Command and control vehicle...sp designs

-
Image
 PPRU-1M SBORKA Mobile recon and command post,Nato code name DOG EAR. Based on MT-LBu tracked AFV it is equiped with a radar for the control of tactical air defence systems armed with missiles and artillary such as the Tunguska sa-19,ZSU-23 shilka, strella sa-13.the Sborka is capable of carrying out target designation whilst moving or stationary. The kit is a 1:35 scale resin kit from SP Designs .It did build up quite well, with a bit of coaxing. i needed to add to the kit and chop and change a few items as you do with most resin kits.The tracks are the resin ones supplied with the kit. i painted the model with humbrol enamels and added the camo freehand using an airbrush . i have pinwashed it and then drybrushed it..
Read more